Harger Road Bike Path and Water Main Feasibilty StudyENGINEERING SERVICES AGREEMENT
VILLAGE OF OAK BROOK
Harger Road Bike Path and Water Main Feasibility Study
THIS AGREEMENT, made and entered into this cx� day of 2017,
by and between Christopher B. Burke Engineering Ltd (hereinafter referred to as
"ENGINEER") and the Village of Oak Brook, a municipal corporation (hereinafter referred to as
"VILLAGE") covers certain professional engineering services in connection with the Harger
Road Bike Path and Water Main Feasibility Study, (hereinafter referred to as "PROJECT").
The VILLAGE wishes to retain ENGINEER for these certain professional engineering
services and ENGINEER is willing to perform such services for the compensation and in
accordance with the terms and conditions described in this Agreement.
NOW, THEREFORE, in consideration of the mutual benefits, covenants and agreements
contained within this Agreement, the parties agree as follows:
I. SCOPE OF SERVICES
ENGINEER agrees to perform engineering consulting services as defined in the Scope of
Services attached as Appendix I and made a part of this Agreement.
2. COMPENSATION AND PAYMENT
ENGINEER shall be paid by VILLAGE for all services stipulated within this Agreement
according to the Compensation Schedule attached as Appendix II and made a part of this
Agreement.
Payment to ENGINEER shall be made by VILLAGE upon receipt of ENGINEER'S
monthly invoice. The invoice shall consist of a summary of direct labor hours by
ENGINEER'S standard job classification times the respective factors as depicted in
Appendix II plus listing of reimbursable costs incurred with copies of appropriate
invoices. The invoice will state the phase of work for which it applies, if a multi -phase
scope is used (e.g., design, construction, etc.). If VILLAGE identifies an item in the
invoice which appears to be in error, VILLAGE may withhold the amount in question,
pay the balance of the invoiced amount, and provide ENGINEER with a statement
concerning the questioned item. Alternatively, VILLAGE may pay the invoiced amount
in full, provide ENGINEER with a statement of the questioned item, and an adjustment,
if appropriate, will be made in the next subsequent invoice submitted by ENGINEER.
Engineer will mark "Invoice number and final" on the invoice which closes
out this contract or a phase of the contract.
If VILLAGE fails to make any payment due ENGINEER for services and expenses,
including amounts wrongly withheld, within thirty (30) days after submittal of
ENGINEER'S billing thereof, the amounts due ENGINEER shall include a charge at the
Page 1
rate of one percent (1.0) per month from such thirtieth (30th) day; and, in addition, the
ENGINEER may, after giving seven (7) days written notice to VILLAGE, suspend
services under this Agreement until it has been paid in full the amounts due it for services
and expenses. During the period of any such suspension, the parties shall have the same
rights and obligations as are provided by Subsection 5(e) of this Agreement.
3. TIME SCHEDULE
The services required by this Agreement shall be completed in accordance with the Time
Schedule attached as Appendix III and made a part of this Agreement. It is recognized by
the parties that the Time Schedule may be contingent upon factors beyond the control of
either party. Both parties will take all reasonable steps to adhere to the Time Schedule.
4. TERM OF AGREEMENT
Unless extended by amendment, this Agreement shall terminate at the time of receipt of
final payment by the ENGINEER, provided that all warranties and representations shall
survive said final payment.
5. GENERAL TERMS AND CONDITIONS
a. Modification
The nature and the scope of services specified in this Agreement may only be
modified by written amendment to this Agreement approved by both parties.
b. Relationship between ENGINEER and VILLAGE
ENGINEER shall serve as VILLAGE'S professional engineering consultant in
those phases of the PROJECT to which this Agreement applies. The relationship
is that of a buyer and seller of professional services, and it is understood that the
parties have not entered into any joint venture or partnership with the other.
C. Responsibility of the ENGINEER
That all plans and other documents furnished by the ENGINEER pursuant to this
Agreement will be endorsed by him and will show his professional seal where
such is required by law.
Notwithstanding anything to the contrary which may be contained in this
Agreement or any other material incorporated herein by reference, or in any
agreement between VILLAGE and any other party concerning the PROJECT,
ENGINEER shall not have control or be in charge of and shall not be responsible
for the means, methods, techniques, sequences or procedures of construction, or
the safety, safety precautions or programs of VILLAGE, the construction
contractor, other contractors or subcontractors performing any of the work or
providing any of the services on the PROJECT, nor shall ENGINEER be
responsible for the acts or omissions of VILLAGE provided that the ENGINEER
Page 2
#11850987_vi
has properly executed his duties. ENGINEER shall not be responsible for the
failure of VILLAGE, any architect, engineer, consultant, contractor or
subcontractor to carry out their respective responsibilities in accordance with the
PROJECT documents, or any other agreement concerning the PROJECT. Any
provision which purports to amend this provision shall be without effect unless it
contains a reference that the content of this Subsection 5(c) is expressly amended
for the purposes described in such amendment and is signed by ENGINEER.
d. Corrections
In the event plans, surveys or construction staking is found to be in error and
revisions of the plans or survey or construction staking are necessary, the
ENGINEER agrees that he will perform such work without expense to the
VILLAGE, even though final payment has been received by him. He shall give
immediate attention to these changes so there will be a minimum delay to the
contractor.
e. Suspension of Services
VILLAGE may, at any time, by written order to ENGINEER (Suspension of
Services Order), require ENGINEER to stop all, or any part of, the services
required by this Agreement. Upon receipt of such an order, ENGINEER shall
immediately comply with its terms and take all reasonable steps to minimize the
occurrence of costs allocable to the services covered by the order.
ENGINEER will not be obligated to provide the same personnel employed prior
to suspension when the services are resumed, in the event the period of any
suspension exceeds thirty (30) days.
f Termination
1) The VILLAGE shall have the right to terminate this Agreement with or
without cause upon serving thirty (30) days written notice upon the other
party.
2) Upon such termination, the liabilities of the parties to this Agreement shall
cease, but they shall not be relieved of the duty to perform their
obligations up to the date of termination. All warranties and the provisions
of Section 5, Paragraph I shall be in full force and effect after termination.
3) Upon such termination, ENGINEER shall cause to be delivered to the
VILLAGE all drawings, specifications, partial and completed estimates,
and any and all other data concerning the PROJECT which ENGINEER is
then accomplishing for the VILLAGE. ENGINEER shall be paid for any
services completed and any services partially completed in accordance
with Sections 2 and 3.
g. Warranties
Page 3
s11850987_vi
In addition to the covenants herein made, the ENGINEER represents and certifies
that its engineering services shall be performed in accordance with the standards
of professional practice, care, and diligence practiced by recognized engineering
firms in the industry in performing services of a similar nature in existence at the
time of performance. The representations and certifications expressed shall be in
addition to any other representations and certifications expressed in this
Agreement, or expressed or implied by law, which are hereby reserved unto the
VILLAGE.
h. Representations
In addition to the covenants herein made, the ENGINEER represents and agrees:
1) That all plans and special provisions to be furnished by the ENGINEER
pursuant to this Agreement will be in accordance with the current standard
specifications and policies of the VILLAGE, it being understood that all
such plans and drafts shall, before being finally accepted, be subject to
approval by the VILLAGE.
2) That he has not employed or retained any company or person, other than a
bona fide employee working solely for the ENGINEER, to solicit or
secure this Agreement, and that he has not paid or agreed to pay any
company or person, other than a bona fide employee working solely for
the ENGINEER, any fee, commission, percentage, brokerage fee, gifts, or
any other consideration, contingent upon or resulting from the award or
making of the Agreement. For breach or violation of this warranty, the
VILLAGE shall have the right to annul this Agreement without liability,
or in its discretion to deduct from the Agreement price or consideration, or
otherwise recover, the full amount of such fee, commission, percentage,
brokerage fee, gift, or contingent fee.
3) The ENGINEER represents and certifies that the ENGINEER is not barred
from contracting with a unit of state or local government as a result of: (1)
a delinquency in the payment of any tax administered by the Illinois
Department of Revenue, unless the ENGINEER is contesting, in
accordance with the procedures established by the appropriate revenue act,
its liability for the tax or the amount of the tax, as set forth in Section 11-
42.1-1 et seq. of the Illinois Municipal Code, 65 ILCS 5/11-42.1-1 et seq.;
or (2) a violation of either Section 33E-3 or Section 33E-4 of Article 33E
of the Criminal Code of 1961, 720 ILCS 5/33E-1 et seq. ENGINEER
represents that the only persons, firms, or corporations interested in this
Agreement as principals are those disclosed to the VILLAGE prior to the
execution of this Agreement, and that this Agreement is made without
collusion with any other person, firm, or corporation. If at any time it
shall be found that the ENGINEER has, in procuring this Agreement,
colluded with any other person, firm, or corporation, then the ENGINEER
shall be liable to the Village for all loss or damage that the VILLAGE may
Page 4
#11850987_vl
suffer, and this Agreement shall, at the VILLAGE's option, be null and
void.
4) That he is qualified technically and is conversant with the policies
applicable to the PROJECT; and that he has and will furnish sufficient,
properly trained and experienced personnel to perform the services
enumerated herein.
5) That he will not employ, for the duration of this Agreement, any person
presently employed by the VILLAGE without the written consent of the
VILLAGE.
6) ENGINEER represents and certifies that, to the best of its knowledge: (1)
no elected or appointed VILLAGE official, employee or agent has a
personal financial interest in the business of ENGINEER or in this
Agreement, or has personally received payment or other consideration for
this Agreement; (2) as of the date of this Agreement, neither ENGINEER
nor any person employed or associated with ENGINEER has any interest
that would conflict in any manner or degree with the performance of the
obligations under this Agreement; and (3) neither ENGINEER nor any
person employed by or associated with ENGINEER shall at any time
during the term of this Agreement obtain or acquire any interest that
would conflict in any manner or degree with the performance of the
obligations under this Agreement.
i. Documents Property of VILLAGE
Drawings, specifications, reports, and any other documents prepared by
ENGINEER in connection with any or all of the services furnished hereunder
shall be the property of VILLAGE and the VILLAGE shall obtain any and all
intellectual property rights in the drawings, specifications, reports, and documents
prepared by ENGINEER in connection with any and all of the services furnished
hereunder. ENGINEER shall have the right to retain copies of all documents and
drawings for its files. All construction drawings shall be prepared electronically
using MICROSTATION software. Paper copies will be provided to the
VILLAGE in full-size (24" x 36") or quarter -size (I1" x 17") as requested.
Electronic design files will also be transferred to the VILLAGE.
If construction services are a part of the ENGINEER'S work, he will create
electronic "As -Built" conditions and will deliver them to the VILLAGE within
thirty (30) days after completion of construction and before final payment to the
ENGINEER. ENGINEER will title these files "Record Drawings".
If construction services are not part of the ENGINEER'S work, he will deliver
electronic MICROSTATION files to the VILLAGE upon request and before final
payment to the ENGINEER.
Page 5
H11850987_vl
j. Access to Records
The ENGINEER shall maintain all books, documents, papers, accounting records
and other evidence pertaining to his costs incurred by reason of this Agreement
and agrees to make such material available, at his office at the address indicated
in Section 5, Paragraph u of this Agreement, at all reasonable times during the life
of this Agreement and for a period of three (3) years from the date of final
payment of the obligations of this Agreement by the VILLAGE or such longer
time as requested by the VILLAGE, for inspection by personnel of the
VILLAGE, or any authorized representative of the VILLAGE, and copies thereof
shall be furnished if requested. The cost of any copies shall be paid by the
VILLAGE.
k. Reuse of Documents
All documents, including drawings and specifications furnished by ENGINEER
pursuant to this Agreement, are intended for use on the PROJECT only. They
should not be used or modified by VILLAGE or others on extensions of the
PROJECT or any other project without specific written verification or adaptation
by ENGINEER. Any reuse or modification without written verification or
adaptation by ENGINEER shall be at VILLAGE'S sole risk.
1. Indemnification
ENGINEER agrees to indemnify, hold harmless, and defend (or pay the
VILLAGE for the costs of defense if the Village so desires in its sole discretion)
the VILLAGE and any of its officers, employees, or agents from and against all
liability, claims, demands, and causes of action arising out of or related to any
loss, damage, injury, death, or loss or damage to property resulting from any
negligence, errors or omissions by the ENGINEER in the performance of this
Agreement.
In the event of joint or concurrent negligence of ENGINEER and VILLAGE,
each shall bear that portion of the loss or expense that its share of the joint or
concurrent negligence bears to the total negligence (including that of third parties)
which caused the personal injury or property damage.
in. Entire Agreement
This Agreement sets forth all the covenants, conditions and promises between the
parties. There are no covenants, promises, agreements, conditions or
understandings between the parties, either oral or written, other than those
contained in this Agreement and the attached Rider No. 1.
n. Governing Law
This Agreement shall be governed by the laws of the State of Illinois both as to
interpretation and performance.
Page 6
#11850987_vl
o. Successors and Assigns
The terms of this Agreement shall be binding upon and inure to the benefit of the
parties and their respective successors and assigns; provided, however, that
neither party shall assign this Agreement in whole or in part without the proper
written approval of the other.
P. Waiver of Contract Breach
The waiver of one party of any breach of this Agreement or the failure of one
party to enforce at any time, or for any period of time, any of the provisions
hereof, shall be limited to the particular instance, shall not operate or be deemed
to waive any future breaches of this Agreement, and shall not be construed to be a
waiver of any provision, except for the particular instance.
q. Severability of Invalid Provisions
If any provisions of this Agreement shall be held to contravene or be invalid
under the laws of any particular State, County or jurisdiction where used, such
contravention shall not invalidate the entire Agreement, but it shall be construed
as if not containing the particular provision or provisions held to be invalid in the
particular State, County or jurisdiction and the rights or obligations of the parties
hereto shall be construed and enforced accordingly.
r. Force Majeure
Neither VILLAGE nor ENGINEER shall be liable for any fault or delay caused
by any contingency beyond their control, including, but not limited to, acts of
God, wars, strikes, walkouts, fires, or natural calamities.
S. Access and Permits
VILLAGE shall arrange for ENGINEER to enter upon public and private
property and shall obtain all necessary approvals and permits required from all
governmental authorities having jurisdiction over the PROJECT.
t. Designation of Authorized Representatives
Each party shall designate one or more persons to act with authority in its behalf
in respect to appropriate aspects of the PROJECT. The persons designated shall
review and respond promptly to all communications received from the other
ply.
U. Address for Notices
Whenever it is provided in this Agreement that notice shall be given or other
communication sent to ENGINEER, such notices or communications shall be
delivered or sent to:
Page 7
#11850987_vl
Christopher B. Burke Engineering, Ltd.
9575 West Higgins Road
Suite 600
Rosemont, Illinois 60018
Attn: Orion Galey, PE
Whenever it is provided in this Agreement that notice shall be given or other
communication sent to the VILLAGE, such notices or communications shall be
delivered or sent to:
VILLAGE OF OAK BROOK
1200 Oak Brook Road
Oak Brook, Illinois 60523
Attn: Doug Patchin
Director of Public Works
Notices personally delivered or sent via U.S. Mail, postage prepaid, shall be
deemed, for all purposes, proper notice.
V. Insurance
ENGINEER agrees to obtain and maintain, for the term of this Agreement, and
for a period of twelve (12) months after the services contracted for hereunder
have been completed, insurance hereinafter provided, furnishing a certificate or
certificates of insurance to the VILLAGE prior to commencing work under this
Agreement. The certificate or certificates of insurance shall be in a form
satisfactory to the VILLAGE from companies authorized to do business in Illinois
and shall provide that the policies referred to shall not be canceled or changed
without first giving thirty (30) days written notice thereof to the VILLAGE. Said
insurance requirements are attached as Appendix IV and made a part of this
Agreement ("REQUIRED INSURANCE POLICIES").
The VILLAGE shall be named as an additional insured and a cancellation notice
recipient on all Required Insurance Policies.
W. Additional Services
ENGINEER shall supply such additional services as requested in writing by
VILLAGE and agreed to by ENGINEER in connection with the PROJECT.
Separate proposals shall be submitted by ENGINEER for furnishing these
additional services. Compensation for such additional services shall be negotiated
by the parties and included in this Agreement by a written amendment.
ENGINEER shall supply such additional services as requested in writing by
VILLAGE and agreed to by ENGINEER in connection with the PROJECT.
Separate proposals shall be submitted by ENGINEER for furnishing these
Page 8
#11850987_vl
additional services. Compensation for such additional services shall be negotiated
by the parties and included in this Agreement by a written amendment.
X. Time
Time is of the essence in the performance of all terms and provisions of this
Agreement.
Y. Third Party Beneficiary
No claim as a third party beneficiary under this Agreement by any person, firm, or
corporation shall be made or be valid against the Village.
Z. Conflicts
If any provisions of this Agreement conflict with any provisions of the attached
appendices I through IV, the provisions of this Agreement shall control. If any
provisions this Agreement conflict with any provisions of the attached Rider No.
1, the provisions of Rider No. I shall control. If any provisions of the attached
appendices I through IV conflict with any I conflict with any provisions of the
attached Rider No. 1, the provisions of Rider No. 1 shall control.
IN WITNESS WHEREOF, the parties set their hands and seals on the date first written
above.
VILLAGE OF OAK B OK
A ind
Vi age arager
Chris Bu ke En ineerin Ltd.
Duly At tonne r
011850987 v1
ATTEST:
S&
Illage Clerk
Page 9
APPENDIX 1
SCOPE OF SERVICES
Per Proposal for Professional Engineering Services submitted by
Christopher B. Burke Engineering, Ltd., Ltd. dated June 21, 2017.
Page 10
#11850987_vl
APPENDIX II
COMPENSATION SCHEDULE
Per Proposal for Professional Engineering Services submitted by
Christopher B. Burke Engineering, Ltd., Ltd. dated June 21, 2017.
Page 11
811850987 vl
APPENDIX III
TIME SCHEDULE
Per Proposal for Professional Engineering Services submitted by
Christopher B. Burke Engineering, Ltd., Ltd. dated June 21, 2017.
Page 12
a11850987_vi
CHRISTOPHER B. BURKE ENGINEERING, LTD.
9575 West Higgins Road Suite 600 Rosemont, Illinois 60016 TEL (847) 823-0500 FAX (847) 823-0520
June 21, 2017
Village of Oak Brook
1200 Oak Brook Road
Oak Brook, IL 60523
Attention: Mr. Doug Patchin
Public Works Director
Subject: Proposal for Feasibility Study
Harger Road Bike Path and Water Main Feasibility Study
(CBBEL Project No. 160597)
Dear Mr. Patchin:
Christopher B. Burke Engineering, Ltd. (CBBEL) is pleased to provide this proposal for
professional engineering services for the Harger Road Bike Path and Water Main Feasibility
Study. Included in this proposal are our Understanding of the Assignment, Scope of Services,
and Estimated Fee.
UNDERSTANDING OF THE ASSIGNMENT
Christopher B. Burke Engineering, Ltd. (CBBEL) understands that the Village of Oak Brook
(the Village) would like to investigate the feasibility of filling a 1,200 foot gap in the bike path
and water main network from the Harger Woods Corporate Center property on the west to
Yorkshire Woods on the east, which includes crossing Salt Creek. The purpose of this
engineering feasibility study is to identify possible range of bike path and water main alignment
alternatives, evaluation of alternatives, and selection of the preferred alternative, as well as
identifying next steps for project implementation and possible funding sources. Approximately
35% of the fee is associated with the water main study while 65% of the fee will be required
to complete the bike path study.
SCOPE OF SERVICES
Task 1 — Data Compilation and Base Mapping
Compilation of all available information within the project study area including Village GIS
data, DuPage County GIS data, aerial photography, and historical roadway/bridge plans.
Base mapping will be developed consisting of:
• Aerial photography will be utilized to digitize existing site conditions, including
pavement, driveways, curbs and gutters, pavement markings, buildings, and
sidewalks/bike paths.
• DuPage County Lidar data will be utilized to generate the existing ground contours.
An existing TIN will be established for the study area and appropriate CAD setup for
investigating vertical components of the bike path and water main.
• A utility file will be created from available Village GIS data. Utility coordination letters
will be sent out to gather all pertinent private utility information. Approximate location
will be drafted into CAD.
One site visit will be made to validate the base mapping. A photo log will be prepared
No traffic or crash data is anticipated to be required for this feasibility study.
Task 2 — Environmental
An environmental resource exhibit will be prepared compiling all available information, such
as national wetland inventory, floodway, flood plain, Section 4(f) public lands, etc.. A field visit
will be made by an environmental resource specialist to GPS any wetlands since the only
mapped wetlands are shown along Salt Creek, and with such an expansive floodplain in this
area, it is anticipated there are additional wetlands in the study area. With the York Woods
Forest Preserve adjacent to Harger Road, our environmental resource specialist will also
evaluate the study area to identify any items/areas of significance.
An Ecological Compliance Assessment Tool (EcoCAT) will be used to screen the project for
protected natural resources.
A special waste screening will be performed within the study area.
Anticipated permits for the bike path and water main project will be identified.
Task 3 — Desian
Three alternative alignments will be investigated for the water main and bike path:
1. West side of Harger Road
2. East side of Harger Road
3. East side of Harger Road and new alignment to east terminus of Yorkshire Woods
Road
Evaluation of bike path and water main alternatives will be performed, which includes
associated required right-of-way acquisition, environmental impacts (wetlands, flood plain,
floodway, endangered species), and cost. The results will be summarized in an evaluation
table. Plan view alternative exhibits will be prepared depicting each concept design and
location. Items to be included in the design exhibits include proposed bike path (assume 8 -
foot wide path), proposed water main, jacking pit locations, bike path bridge abutments/piers,
bike path cross locations, and required right-of-way/permanent easement/temporary
easements. The vertical components will be factored into the design, but vertical profiles will
not be generated for this feasibility study.
Structural investigation will be performed pertaining the bike path crossing Salt Creek. Existing
bridge plans (if available) will be reviewed and considered developing the concept bridge
design. Feasible bridge types will be identified along with associated programming level costs.
Modification to the existing roadway bridge structure will be investigated. Available hydraulic
OCGrym
WPROPOSAMADMIM2a17 ,a rPo l Fe bill, Stu1112117.dwc
information will be considered when developing the concept designs. A preferred bridge type
will be identified.
Hydraulic and drainage considerations will be factored into the concept design and noted in
the Feasibility Study Report.
Constructability considerations will be factored into the concept design and noted in the
Feasibility Study Report.
A preferred alternative will be identified. Addition design refinements or investigation of the
preferred alternative will not be will not be a part of this feasibility study.
Task 4 — Coordination
This task will focus on overall project coordination with the Village and other stakeholders.
One project status meeting is planned with the Village. It is assumed that the Village staff will
conduct any property owner meetings required, but CBBEL will develop the appropriate
materials to facilitate discussion of the project.
Task 5 — Feasibility Study Report
CBBEL will prepare a feasibility study report for the project, which will include: introduction,
existing conditions, concept alternatives, concept alternatives evaluation & analysis,
recommended preferred alternative selection, other considerations, next steps. This task
includes development of the feasibility study report, and all supporting exhibits and
documentation. A draft submittal will be made to the Village and subsequently finalized.
Task 6 — Project Administration & Quality Assurance: This task includes overall project
administration and management, as well as quality assurance.
ENGINEERING SERVICES TOTALS
Task 1 — Data Compilation and Base Mapping
Task 2 — Environmental
Task 3 — Design
Task 4 — Coordination
Task 5 — Feasibility Study Report
Task 6 — Project Administration & Quality Assurance
DIRECT COSTS
Outside Copies, Mileage, Delivery Services
ENGINEERING SERVICES GRAND TOTAL
occrjdc
NAPROPOSA'_St MIN\MiN rg r Road FmSiWlty Study_M2117.dx
$
3,618.00
$
2,868.00
$
6,024.00
$
1,240.00
$
2,656.00
$ 930.00
Total $17,336.00
$500.00
$17,836.00
We would like to establish our contract in accordance with the Village of Oak Brook's
Engineering Services Agreement, Rider No. 1, and CBBEL General Terms and Conditions
and the attached Standard Charges.
It is understood that this agreement may be terminated by either party upon 60 days written
notice.
Please sign both copies of the agreement and return one to us as an indication of acceptance
and notice to proceed.
®rI111111IStODhe'r
B. Burke, PhD, PE, D.WRE, Dist.M. ASCE
President
Encl: Standard Charges
General Terms and Conditions
THIS P OSAL, GEN TERMS AND CONDITIONS, AND STANDARD CHARGES
TITLE:
DATE:
OCGimc
N:I ROPOSA:SWDMIN12017Wmgat Ro Femibility SGKy_06211]O
CHRISTOPHER B. BURKE ENGINEERING, LTD.
STANDARD CHARGES FOR PROFESSIONAL SERVICES
JANUARY. 2017
Personnel
Principal
Engineer VI
Engineer V
Engineer IV
Engineer III
Engineer 1/II
Survey V
Survey IV
Survey III
Survey 11
Survey
Engineering Technician V
Engineering Technician IV
Engineering Technician III
Engineering Technician 1/II
CAD Manager
Assistant CAD Manager
CAD II
CAD I
GIS Specialist III
GIS Specialist 1/11
Landscape Architect
Environmental Resource Specialist V
Environmental Resource Specialist 1V
Environmental Resource Specialist III
Environmental Resource Specialist 1/II
Environmental Resource Technician
Administrative
Engineering Intern
Information Technician III
Information Technician 1/II
Direct Costs
Outside Copies, Blueprints, Messenger, Delivery Services, Mileage
"Charges include overhead and profit
Charges'
/Hr
257
232
191
155
140
110
213
180
157
115
90
182
148
133
115
161
140
140
108
135
78
155
200
155
128
105
105
98
59
118
107
Cost + 12%
Christopher B. Burke Engineering, Ltd. reserves the right to increase these rates and costs by 5%
after December 31, 2017.
APPENDIX IV
Insurance
Engineer shall maintain for the term of this Agreement, and for a period of twelve months
after the services is contracted for hereunder have been completed, insurance policies covering:
Workers Compensation: Statutory.
2. Employers Liability Insurance:
$1,000,000 injury -per occurrence
$500,000 disease -per employee
$1,000,000 disease -policy limit
Such insurance shall evidence that coverage applies in the State of Illinois.
3. Comprehensive General Liability Insurance:
$2,000,000 per occurrence combined single limit. Coverages shall include Broad
Form Property Damage Endorsements and Blanket Contractual Liability (must
expressly cover the indemnity provisions of the Agreement).
4. Comprehensive Automobile Liability Insurance:
$1,000,000 combined single limit, any auto.
5. Professional Liability Insurance (errors and omissions):
$1,000,000 per claim and $2,000,000 in aggregate.
6. Umbrella or excess liability:
The required coverages may be in any combination of primary, excess, and
umbrella policies. Any excess or umbrella policy must provide excess coverage
over underlying insurance on a following -form basis such that when any loss
covered by the primary policy exceeds the limits under the primary policy, the
excess or umbrella policy becomes effective to cover such loss.
Engineer will provide the Village with a certificate of insurance and additional
insured endorsement showing the Village added to the General Liability Insurance
as an additional insured.
8. Coverage shall not be suspended, voided, canceled, or reduced except after thirty
(30) days prior written notice by certified mail has been given to the Village. If a
standard Certificate of Insurance form is used with a cancellation clause, the
words "endeavor to" and "but failure to mail such notice shall impose no
obligation or liability of any kind upon the company, its agents or representatives"
will be stricken or crossed out.
Page 13
u n sso9s7yi